Looking for Answers about Bento in Lombard?

The Bento Boxes are manufactured in China.

The Chadwick Bento Boxes are a color pattern of soft browns and khakis.

The Lombard is grey in color. We do not currently manufacture the Bento in black.

The Bento boxes have not been tested for use on their sides or as a shelf; it is not recommended to use them as described.

The Bento boxes are designed for vertical storage and stacking.

The dimensions are as follows for the Bento Box with the corresponding Bento Topper:

Medium Assembly
• Using Topper as a Tray = 12.0 x 6.8 x 5.6 in. (30.3 x 17.1 x 14.1 cm.)
• Using Topper as a Lid = 12.0 x 6.8 x 6.3 in. (30.3 x 17.1 x 15.8 cm.)

Large Assembly
• Using Topper as a Tray = 12.6 x 12.6 x 10.2 in. (31.9 x 31.9 x 25.8 cm.)
• Using Topper as a Lid = 12.6 x 12.6 x 11.6 in. (31.9 x 31.9 x 29.5 cm.)

XL Assembly
• Using Topper as a Tray = 20.0 x 13.1 x 10.6 in. (50.7 x 33.1 x 26.9 cm.)
• Using Topper as a Lid = 20.0 x 13.1 x 12.5 in. (50.7 x 33.1 x 30.6 cm.)

Bento was intended for the organization and storage of everyday, frequently-accessed items. Bento is designed for INDOOR USE ONLY.

Spot clean with a damp cloth only on soiled areas. Cleaners are not recommended.

Bento was intended for the organization and storage of everyday, frequently-accessed items. Bento is designed for INDOOR USE ONLY.

Spot clean with a damp cloth only on soiled areas. Cleaners are not recommended.

Our products are designed for household use and have not been tested for archival properties, so we do not recommend them for specific preservation applications. Most of our storage products considered for such functions are made from polyethylene, polypropylene or polystyrene, which contain no plasticizers (softeners). These materials can be identified by the molded recycle symbols 2, 4, 5 and 6. Archivists avoid plastics like PVS (vinyl) due to the presence of plasticizers and their potential to migrate. It should also be noted that gasses and water vapor can pass through the walls of plastic containers over time. Therefore, even a product with a very good lid seal cannot completely exclude them during years of storage.

Where to buy information will be updated on our website as the product becomes available in stores. We do apologize that they are not currently available in retailers.

The set includes -- (1) Small, (1) Medium, (1) Large, (1) X-Large of the Bento Boxes and (1) Large, (1) X-Large of the Bento Toppers.

We closely monitor the sales of our products and conduct consumer preference surveys several times to detect changes and color trends. You may be sure that we will introduce new colors and/or patterns as soon as the demand for it becomes greater.

Bento products are manufactured using Medium Density Fiberboard (MDF). The MDF used is certified to conform to regulations set forth by the California Air Resources Board (CARB).

Both Bento boxes will accommodate file folders perfectly.

The Bento Boxes are stackable with or without lids. They are built to be very modular.

The dimensions of the Bento Boxes and Toppers can be located under the "Product Specifications" tab.

#1K22 X-Large Bento Box in Paprika 19.61" w x 12.68" l x 9.9" h

#1K23 Large Bento Box in Paprika 12.05" w x 12.05" l x 9.5" h

#1K24 Medium Bento Box in Paprika 11.42" l x 6.22" w x 4.9" h

#1K25 Small Bento Box in Paprika 5.63" w x 5.63" l x 4.5" h

#1K33 Medium Bento Topper in Paprika 11.93" w x 6.73" l x 1.5" h

#1K34 Large Bento Topper in Paprika 12.56" w x 12.56" l x 2.2" h

#1K35 X-Large Bento Topper in Paprika 19.96" w x 13.03" l x 2.3" h

The Bento storage boxes are manufactured in China.

Bento was intended for the organization and storage of everyday, frequently-accessed items. Bento is designed for INDOOR USE ONLY.

Spot clean with a damp cloth only on soiled areas. Cleaners are not recommended.