Question
Anchors for hardware pack
I am going to install the FastTrack system in my garage. Looks very simple to setup. My question is related to the hardware pack. How come it only comes with 4 anchors but there 11 screws? Don't I need an anchor for each screw that I am using to mount the FastTrack rail?
Type of Organizer: Organizing Rookie
asked 1 year, 10 months ago

by
bnrtech
on FastTrack Garage Hardware Pack
0points
0out of 0found this question helpful.
Answer this Question
answer 1
Use the screws alone (top and bottom of rail) at the studs. The anchors are used between the studs at the top of rail.
answered 8 months ago

by
McBrian
0points
0out of 0found this answer helpful.
answer 2
This is late but you only need to use the anchors for the areas where the screws don't go into studs.
answered 1 year, 6 months ago

by
TMajic
0points
0out of 0found this answer helpful.
answer 3
The Fast Track Rail is recommeded to be installed into studs. The 48" rail must hit 4 studs and the 84" rail must hit 6 studs. You can not use an anchor into a stud, only a screw. In between the studs is were you will use an anchor and a screw. If installing a 48" rail you will need one hardware pack, if installing an 84" rail you will need two hardware packs.
answered 1 year, 9 months ago

by
Rubbermaid4
0points
0out of 0found this answer helpful.