Great for sporting events or outdoor activities, this jug has durable construction that resists scratching, denting and fading. It has a leak resistant lid and spout. The urethane based foam has superior thermal retention to keep your drink cool. It is stain and odor resistant with an easy-to-clean liner.
Sure, if you don't mind waiting over the sink for 5-10 minutes while the water drasins out of the body. It gets in by way of the hole for the handle to attach to the body.
answered 2 years ago
by
Anonymous
Lawton, OK.
0points
0out of0found this answer helpful.
answer 2
This item should be hand washed. We do not recommend placing it in a dishwasher.
We purchased a 8.31" x 8.41" FG156006MODBL 1560 1 Gallon jug earlier in the spring. The handle has snapped off. Do you sell a replacement handle for this product?
Gosh. I've had the same issue twice. I wish that Rubbermaid offered replacement handles, but apparently they do not.
answered 8 months ago
by
DaveInMinneapolis
Minneapolis, MN
0points
0out of0found this answer helpful.
answer 2
We do not manufacture replacement handles for our water jugs. For assistance with a product problem, please contact Rubbermaid Consumer Services through the contact us portion of our website. You may also call 888-895-2110 to speak to a representative, 8:30 to 5:00 ET, Monday through Friday.
In my experience with three of these jugs (one and two gallon versions), there is no o-ring seal around the outer lid. However, I've not experienced leaking from the lid when being careful to ensure that the lid is threaded on correctly and "snugged" down to the jug.
answered 8 months ago
by
DaveInMinneapolis
Minneapolis, MN
0points
0out of0found this answer helpful.
answer 2
The lid does not currently have a gasket or o-ring. If you feel your Rubbermaid item is defective and failed shortly after purchase, we ask that you contact our Consumer Services Department toll free at 888-895-2110, 8:30 a.m. - 5:00 p.m. EST, M-F.
If your cooler uses a black rubber o-ring around the underside of the lid spout, these are available as a replacement part, all other parts we do not offer for replacement. To order please contact Rubbermaid Consumer Service at 888-895-2110, M-F 8:30 am- 5:00 pm, ET.
1) Place the black O-ring in the lid. 2) Place the spout on the lid in the closed position. 3) Press firmly on the spout until both sides snap into place. 4) Open and close the spout to verify it functions properly.