Search Rubbermaid
Looking for Answers about Spring Top™ Waste Cans?
See all Rubbermaid Questions and Answers >
Trash & Recycling Q & A >
Indoor Waste Cans-Covered Q & A
Customer Questions & Answers for
Spring Top™ Waste Cans
With a contemporary design that fits into narrow spaces, this waste can has an oversized button that allows the lid to spring open for easy disposal. Plus, the unique lid and base completely conceal 13 gallon trash bags.
Questions & Answers for Spring Top™ Waste Cans
Question
Replacement lid
Can a replacement lid be purchased for the #2339 spring top lid.
Type of Organizer: Organizing Rookie
asked 2 years, 2 months ago 
on Spring Top™ Waste Cans
by
Surane
0points
0out of 0found this question helpful.
Question
Can i purchase a spring for lid on 13gal waste container
there are 2 springs and we lost one.
asked 2 years, 1 month ago on Spring Top™ Waste Cans
by
Dummy
+2points
2out of 2found this question helpful.
1 answer
Answers
answer 1
For replacement parts, please contact Rubbermaid Consumer Service by calling 1-888-895-2110 Monday through Friday, 8:30 am to 5:00 pm.
Please be sure to have the model number from the packaging or the molded in part number located on the bottom of the container or underside of the lid.
Replacement parts are subject to availability.
Please be sure to have the model number from the packaging or the molded in part number located on the bottom of the container or underside of the lid.
Replacement parts are subject to availability.
answered 2 years, 1 month ago
by
Rubbermaid3
+1point
1out of 1found this answer helpful.
Question
I need help putting my trashcan back together.
My spring-top waste can has two springs that have come out. I have the springs. How do I put them back?
Type of Organizer: Inventive Organizer
asked 1 year, 11 months ago on Spring Top™ Waste Cans
by
needshelp
North Carolina
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
To reattach springs to the wastebasket:
1. Place the wastebasket hood on a flat surface with the spring top lid off.
2. While holding one side of the wastebasket hood up slightly, hold the spring with the short arm facing the front of the hood (has lever with word “push”). Put the hinge tab of the hood through the hole in the spring. The hook end of the spring (facing down) should sit in the groove of the hood.
3. The long part of the spring will be under the backside of the wastebasket hood. Gently push and pull the arm of the spring to the inside of the opening, so that it rests on the top backside of the hood. Repeat for the other side of the hood.
4. Take the spring top lid and install one side at a time. Place the hood hinge tab through the hole on the spring top lid. Bring the long arm of the spring towards you and push gently toward the inside of the opening until it rests in the grove of the lid.
5. Repeat step 4 to install the other side of the spring top lid.
1. Place the wastebasket hood on a flat surface with the spring top lid off.
2. While holding one side of the wastebasket hood up slightly, hold the spring with the short arm facing the front of the hood (has lever with word “push”). Put the hinge tab of the hood through the hole in the spring. The hook end of the spring (facing down) should sit in the groove of the hood.
3. The long part of the spring will be under the backside of the wastebasket hood. Gently push and pull the arm of the spring to the inside of the opening, so that it rests on the top backside of the hood. Repeat for the other side of the hood.
4. Take the spring top lid and install one side at a time. Place the hood hinge tab through the hole on the spring top lid. Bring the long arm of the spring towards you and push gently toward the inside of the opening until it rests in the grove of the lid.
5. Repeat step 4 to install the other side of the spring top lid.
answered 1 year, 10 months ago
by
Rubbermaid4
+1point
1out of 1found this answer helpful.
Question
Since I cannot purchase a replacement lid for the springtop trash can, is there another lid that can be used on the same base?
The spring top broke and the rest of the trash can is like new, but I do need a lid for it or it is not really useful in the kitchen.
Type of Organizer: Inventive Organizer
asked 1 year, 10 months ago on Spring Top™ Waste Cans
by
Esam
0points
0out of 0found this question helpful.
Question
do you have replacement springs for model 233900-WHT
need replacement springs for 53 quart spring top model 233900-WHT
asked 1 year, 2 months ago on Spring Top™ Waste Cans
by
GHMA
ny
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
For replacement parts, please contact Rubbermaid Consumer Service by calling 1-888-895-2110 Monday through Friday, 8:30 am to 5:00 pm.
Please be sure to have the model number from the packaging or instruction booklet, or the molded in part number located on the bottom of the container or underside of the lid.
Replacement parts are subject to availability.
Please be sure to have the model number from the packaging or instruction booklet, or the molded in part number located on the bottom of the container or underside of the lid.
Replacement parts are subject to availability.
answered 1 year, 2 months ago
by
Rubbermaid3
0points
0out of 0found this answer helpful.
Question
Why do you no longer have either swing top kitchen trash cans or dark green kitchen trash cans?
We bought Rubbermaid's dark green swing top kitchen trash can to match our counter tops several years ago and a light blue smaller one for our bath room which has light blue tile walls. Why are that style and those colors no longer in your product line. Who wants a black or white trash can in their kitchen or bath room?
asked 1 year, 2 months ago on Spring Top™ Waste Cans
by
Montani42
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Retailers expect that Rubbermaid will sell them product with fast turnover in their stores. We depend on living up to this expectation.
We closely monitor the sales of our products and conduct consumer preference surveys regarding color several times each year to detect changes and strong trends.
We sincerely appreciate your interest in our products and will pass your comments on to our Research and Development Department for consideration.
We closely monitor the sales of our products and conduct consumer preference surveys regarding color several times each year to detect changes and strong trends.
We sincerely appreciate your interest in our products and will pass your comments on to our Research and Development Department for consideration.
answered 1 year, 2 months ago
by
Rubbermaid3
0points
0out of 0found this answer helpful.
1 of 1