Looking for Answers about Horizontal Storage Shed?

The inside dimensions of the #3752 Slide Lid shed are given on the description tab of the product information, 3'11"w x 1'9"d x 2'5"h.

Please be sure to measure your bicycle to verify that your bicycle or bicycles will fit.

The left door has a tab that inserts through the roof panel so that it can be locked. This feature does not allow the doors to open without lifting the lid.

The outside dimensions are 55" W x 28" D x 36" H. The inside dimensions are 47" W x 21" D x 29" H.

The product weight is not posted on our website. For specific product questions, please contact our Consumer Service Department at 888-895-2110 Monday through Friday 8:30 am to 5:00 pm ET.

The difference between these two models of sheds is the 3748 has a solid lid (one piece) and the 3753 has a split lid, where the lid is in two sections (left and right side).

To order replacement parts, please contact our Consumer Services Department by calling toll free 888-895-2110, between the hours of 8:30 a.m. and 5:00 p.m. EST, Monday through Friday. We accept VISA and MasterCard.

In order to assist you we will need to identify the model number of your item. Before calling, please be sure to locate the molded in part number found on the item.

On the home page, in the lower left hand corner, click on “Assembly Instructions” listed below “Support Center”. This page lists a description and the model number of our products. Click on the model number of your item to download and print the instructions.

Rubbermaid sheds are not designed or intended as a location for operating a generator.

Many of our storage sheds can hold garbage cans. Inside measurements are provided for each shed, which will help determine if your cans will fit.

Please remember to measure your cans from the tallest and widest areas for comparison. The inside dimensions are measured at the smallest and shortest areas in the sheds.

The #3748 Horizontal Shed has inside dimensions of 3'11" w x 1'9" d x 2'5" h.

The top can be closed while the doors are open; however, the top has to be lifted in order to close the doors properly and lock the shed.

Replacement parts are available for many of our storage sheds. To order, please call Rubbermaid Consumer Services at 888-895-2110, Monday through Friday 8:30 am to 5:00 pm ET.

When calling, please have the part number located on the interior wall of any of the panels. This number will typically be a combination of three digits and a letter.

Thank you for your interest in our outdoor storage solutions.

You may view inside dimensions of our sheds on the product page of each shed to determine which shed will accommodate your generator. The floor of this shed will accommodate up to 350 pounds, evenly distributed. If your generator has feet or wheels, we suggest that you place a piece of plywood under the feet to distribute the weight more evenly.

We do not manufacture trash cans to fit specifically inside this storage shed. The internal dimensions of the shed are 3'11" w x 1'9" d x 2'5" h.

A color swatch is provided on each product page under the "Product Specifications" portion of the page; by scrolling your mouse over the color swatch, a larger image and description of the color will be appear.

The "Product Specifications" portion is located below the large photo / description area and above the Customer Reviews section.

The #3747 Large Horizontal Shed measures approximately 12" from the shelf bottom to the floor.

The #3748 and #3753 Horizontal Sheds measure approximately 8" from the shelf bottom to the floor.