Looking for Answers about 3-6 Ft Classic Configurations Closet Kits?

The FastTrack Closet brackets and shelving can be installed on the Configurations (and HomeFree) uprights.

For assistance with weight limits, please contact our Consumer Service Department at 888-895-2110 Monday through Friday 8:30 am to 5:00 pm ET.

The Configurations titanium shelving is sold separately in the 2-4' shelving sections only. We have provided links below to the different add-on shelving options available.

The #3H11 Configurations Closet Kit will include two 36" and two 26" Clothes Rods.

The uprights for the HomeFree and Configurations systems should be spaced 22" apart, from inside to inside (meaning there will be 22" of wall space between each upright).

When installing Shelf A onto the bracket, the front lip of the shelf should be placed onto the front of the bracket. "Lay" the shelf down so that the back wire rests in the front notch of the bracket. If you need to overlap the shelving on the bracket, Shelf A must be installed first, followed by Shelf B. Once you lay Shelf B down into the bracket, it will seat in the back notch between Shelf A and the upright.

Each kit will include assembly instructions that explain the installation of the uprights and the shelving into the brackets.

The #3H11 Closet Kit will include two telescoping hang rods, or a total of 4 individual hang rods.

Our suggestion for removing the adhesive label (or the store's price sticker) is to use a small amount of cooking oil.

Rub the oil into the label to soften it and loosen the adhesive to a point where you can lift off the label and wipe away any remaining adhesive. If after removing the label you still feel stickiness, place a liberal amount of talcum powder on that area, allow it to stand for approximately 30 minutes, then rub it off. These removal methods will not harm the finish of the product in any way.

The Configurations and HomeFree Brackets can be used with the FastTrack Closet Uprights.

The HomeFree series™ Closet Kits are designed so that cutting is not necessary for installation; instructions on cutting this product line are not available.

Please note that if the product is cut to size, use all necessary safety precautions.

The original HomeFree packaging for the 6-10' Kit did provide an incorrect number of hang rods included; this was corrected shortly thereafter to reflect the correct amount of two 48" and two 26" hang rods.

We do apologize for any inconvenience this error may have caused.

The 26" shelf is the smallest shelf available for the Configurations System. With the necessary 22" spacing of the uprights, the smallest shelf possible is the 26" length.

The recommended installation height for the Configurations Kits is 86.5"; this can be adjusted as needed.

The 3'-6' Deluxe Kit comes with 2 36.25" shelves and 6 26.25" shelves. These shelves can be mounted separately but they are also designed to be overlapped to expand to your desired measurements.

For assembly assistance and troubleshooting, we ask that you contact our Consumer Service Department by calling 888-895-2110 Monday through Friday, 8:30 am to 5:00 pm ET.

The Configurations Closet System only accommodates one size bracket, which is 12". We do not manufacture a shorter bracket or a bracket with the rod hanger locations closer to the rear of the bracket.

The 4-8 ft Deluxe Configurations Kit will fit in a closet that measures anywhere from 4 to 8 feet wide.

The Configurations shelving is currently offered in the 12" depth only. We do apologize for any inconvenience.

The Configurations shelves are 12" deep.

Corner shelves are available only when using our Direct Mount System. Configurations and HomeFree shelving systems do not have a corner shelf option.

The Configurations shelving are 12" deep.

The difference is the amount of shelf space provided by each kit. The Deluxe Kits will have more shelving than the Classic Kits.

Assembly instructions are provided on our website that can be used to determine the amount of shelving each kit will include.